HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

151
Examples
# Enable IPv6 multicast routing on the public network and enter public network IPv6 PIM view.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] quit
[Sysname] ipv6 pim
[Sysname-pim6]
# Enable IPv6 multicast routing in VPN instance mvpn and enter IPv6 PIM view of VPN instance mvpn.
<Sysname> system-view
[Sysname] ipv6 multicast routing vpn-instance mvpn
[Sysname-mrib6-mvpn] quit
[Sysname] ipv6 pim vpn-instance mvpn
[Sysname-pim6-mvpn]
ipv6 pim bfd enable
Use ipv6 pim bfd enable to enable IPv6 PIM to work with BFD.
Use undo ipv6 pim bfd enable to disable IPv6 PIM to work with BFD.
Syntax
ipv6 pim bfd enable
undo ipv6 pim bfd enable
Default
IPv6 PIM is disabled to work with BFD.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
This feature does not take effect unless you enable IPv6 PIM-DM or IPv6 PIM-SM on an interface before
you configure this feature.
Examples
# On the public network, enable IPv6 multicast routing, enable IPv6 PIM-DM on interface Ethernet 1/1,
and enable IPv6 PIM to work with BFD on the interface.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] quit
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ipv6 pim dm
[Sysname-Ethernet1/1] ipv6 pim bfd enable
Related commands
• ipv6 pim dm
• ipv6 pim sm