HP MSR2000/3000/4000 Router Series IP Multicast Command Reference

61
Predefined user roles
network-admin
Parameters
acl-number: Specifies an IPv4 basic ACL by its number in the range of 2000 to 2999.
Usage guidelines
In an ACL, the source field specifies the source address range for the legal BSR. If you specify a VPN
instance in the ACL, the ACL does not take effect. The other optional parameters except the time-range
keyword and the fragment keyword are ignored.
Examples
# On the public network, configure the legal BSR address range to 10.1.1.0/24, so that only the devices
on the subnet 10.1.1.0/24 can act as the BSR.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 10.1.1.0 0.0.0.255
[Sysname-acl-basic-2000] quit
[Sysname] pim
[Sysname-pim] bsr-policy 2000
Related commands
c-bsr (PIM view)
c-bsr (PIM view)
Use c-bsr to configure a candidate-BSR (C-BSR).
Use undo c-bsr to remove a C-BSR.
Syntax
c-bsr ip-address [ scope group-address { mask-length | mask } ] [ hash-length hash-length | priority
priority ] *
undo c-bsr ip-address [ scope group-address { mask-length | mask } ]
Default
No C-BSR is configured.
Views
PIM view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address of a C-BSR.
scope group-address: Specifies a multicast group address to which the C-BSR in an admin-scoped zone
is designated, in the range of 239.0.0.0 to 239.255.255.255. If this option is not specified, the C-BSR is
used for the global-scoped zone.
mask-length: Specifies the address mask length in the range of 8 to 32.