4000 Router Series IP Multicast Command Reference

Parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string

of 1 to 31 characters. If this option is not specified, the command displays PIM information on the public

network.

interface-type interface-number: Specifies an interface by its type and number. If you do not specify an

interface, this command displays PIM information on all interfaces.

verbose: Displays detailed PIM information. If you do not specify this keyword, this command displays

brief PIM information.

Examples

# Display brief PIM information on all interfaces on the public network.

<Sysname> display pim interface

Interface NbrCnt HelloInt DR-Pri DR-Address

Eth1/1 1 30 1 10.1.1.2

Eth1/2 0 30 1 172.168.0.2 (local)

Eth1/3 1 30 1 20.1.1.2

Table 25 Command output

Field Descri

tion

NbrCnt Number of PIM neighbors.

HelloInt Interval for sending hello messages.

DR-Pri Priority for DR election.

# Display detailed PIM information on Ethernet 1/1 on the public network.

<Sysname> display pim interface ethernet 1/1 verbose

Interface: Ethernet1/1, 10.1.1.1

PIM version: 2

PIM mode: Sparse

PIM DR: 10.1.1.2

PIM DR Priority (configured): 1

PIM neighbor count: 1

PIM hello interval: 30 s

PIM LAN delay (negotiated): 500 ms

PIM LAN delay (configured): 500 ms

PIM override interval (negotiated): 2500 ms

PIM override interval (configured): 2500 ms

PIM neighbor tracking (negotiated): disabled

PIM neighbor tracking (configured): disabled

PIM generation ID: 0xF5712241

PIM require generation ID: disabled

PIM hello hold interval: 105 s

PIM assert hold interval: 180 s

PIM triggered hello delay: 5 s

PIM J/P interval: 60 s

PIM J/P hold interval: 210 s

PIM BSR domain border: disabled

PIM BFD: disabled