HP MSR2000/3000/4000 Router Series Layer 2 - WAN Configuration Guide

4
To configure the peer:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure the PAP username
and password sent from the
peer to the authenticator
when the peer is
authenticated by the
authenticator by using PAP.
ppp pap local-user username
password { cipher | simple }
password
By default, when being
authenticated by the authenticator
by using PAP, the peer sends null
username and password to the
authenticator.
Configuring CHAP authentication
Depending on whether the authenticator is configured with a username, the configuration of CHAP
authentication includes the following types:
• Configuring CHAP authentication when the authenticator name is configured
To configure the authenticator:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure the authenticator to
authenticate the peer by using
CHAP.
ppp authentication-mode chap
[ [ call-in ] domain isp-name ]
By default, PPP authentication is
disabled.
4. Configure a username for the
CHAP authenticator.
ppp chap user username
The default setting is null.
The username you configure for the
authenticator must be the same as
the local username you configure
for the authenticator on the peer.
5. Configure local or remote
AAA authentication.
For local AAA authentication, the
username and password of the
peer must be configured on the
authenticator.
For remote AAA authentication,
the username and password of the
peer must be configured on the
remote AAA server.
For more information about AAA
authentication, see Security
Configuration Guide.
The username configured for the
peer must be the same as that
configured on the peer.
The passwords configured for the
authenticator and peer must be the
same.
To configure the peer:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A