HP MSR2000/3000/4000 Router Series Layer 3 - IP Services Command Reference

166
[Sysname-acl-adv-3001] quit
[Sysname] nat static outbound net-to-net 192.168.1.1 192.168.1.255 global 2.2.2.0 24 acl
3001
Related commands
• display nat all
• display nat static
• nat static enable
reset nat session
Use reset nat session to clear NAT sessions.
Syntax
MSR2000/MSR3000:
reset nat session
MSR4000:
reset nat session [ slot slot-number ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Clears NAT sessions for the card specified by the slot number. If you do not specify this
option, this command clears NAT sessions for all cards. (MSR4000)
Usage guidelines
After you remove the NAT session, the corresponding NAT EIM table and NO-PAT table are removed at
the same time.
If you do not specify any keyword, this command clears all NAT sessions.
Examples
# On the MSR2000/MSR3000 router, clear all NAT sessions.
<Sysname> reset nat session
# On the MSR4000 router, clear NAT sessions of slot 2.
<Sysname> reset nat session slot 2
Related commands
display nat session