4000 Router Series Layer 3 - IP Services Command Reference

177

IPv6 adjacency table commands

display ipv6 adjacent-table

Use display ipv6 adjacent-table to display IPv6 adjacency entries.

Syntax

display ipv6 adjacent-table { all | physical-interface interface-type interface-number | routing-interface

interface-type interface-number | slot slot-number } [ count | verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

all: Displays all IPv6 adjacency entries.

physical-interface interface-type interface-number: Displays IPv6 adjacency entries about the specified

physical interface.

routing-interface interface-type interface-number: Displays IPv6 adjacency entries about the specified

routing interface.

slot slot-number: Displays IPv6 adjacency entries about the specified card. The slot-number argument

specifies a card by its slot ID which can only be 0. (MSR2000/MSR3000)

slot slot-number: Displays IPv6 adjacency entries about the specified card. The slot-number argument

specifies a card by its slot ID. (MSR4000)

count: Displays the total number of IPv6 adjacency entries.

verbose: Displays detailed information about IPv6 adjacency entries.

Examples

# Display detailed information about all IPv6 adjacency entries.

<Sysname> display ipv6 adjacent-table all verbose

IPv6 address : N/A

Routing interface : Pos0/0

Physical interface : Pos0/0

Logical interface : N/A

Service type : PPP

Action type : Forwarding

Link media type : P2P

Slot : 0

Virtual circuit information : N/A

Link head information(IPv6) : ff030057