HP MSR2000/3000/4000 Router Series MPLS Command Reference

95
in-label in-label-value: Specifies the incoming label in the range of 16 to 1023.
Examples
# On the egress node, configure a static CRLSP with the name static-te-1 and incoming label 233.
<Sysname> system-view
[Sysname] static-cr-lsp egress static-te-1 in-label 233
Related commands
• display mpls static-cr-lsp
• static-cr-lsp ingress
• static-cr-lsp transit
static-cr-lsp ingress
Use static-cr-lsp ingress to configure the ingress node of a static CRLSP.
Use undo static-cr-lsp ingress to delete the ingress node configuration of the static CRLSP.
Syntax
static-cr-lsp ingress lsp-name { nexthop next-hop-addr | outgoing-interface interface-type
interface-number } out-label out-label-value [ bandwidth [ ct0 | ct1 | ct2 | ct3 ] bandwidth-value ]
undo static-cr-lsp ingress lsp-name
Default
No static CRLSP exists on the device.
Views
System view
Predefined user roles
network-admin
Parameters
lsp-name: Specifies a name for the static CRLSP, a case-sensitive string of 1 to 15 characters.
nexthop next-hop-addr: Specifies the nexthop IP address.
outgoing-interface interface-type interface-number: Specifies an outgoing interface by its type and
number. The specified interface must be a P2P interface.
out-label out-label-value: Specifies the outgoing label, a value of 0, 3, or from 16 through 1023.
bandwidth: Specifies the CT and required bandwidth for the static CRLSP. If you do not specify this
keyword, the bandwidth required by the static CRLSP is 0 kbps. If you specify this keyword but do not
specify a CT, the static CRLSP belongs to CT 0.
ct0: Specifies CT 0 for the static CR-LSP.
ct1: Specifies CT 1 for the static CR-LSP.
ct2: Specifies CT 2 for the static CR-LSP.
ct3: Specifies CT 3 for the static CR-LSP.
bandwidth-value: Specifies the bandwidth required by the static CRLSP, in the range of 1 to 4294967295
kbps. The default is 0 kbps.