4000 Router Series MPLS Configuration Guide

270

NextHop : :: Preference: 0

Interface : Eth1/1 Cost : 0

Destination: 2001:1::2/128 Protocol : Direct

NextHop : ::1 Preference: 0

Interface : InLoop0 Cost : 0

Destination: 2001:2::/96 Protocol : BGP4+

NextHop : ::FFFF:606:609 Preference: 0

Interface : NULL0 Cost : 0

Destination: FE80::/10 Protocol : Direct

NextHop : :: Preference: 0

Interface : NULL0 Cost : 0

Destination: FF00::/8 Protocol : Direct

NextHop : :: Preference: 0

Interface : NULL0 Cost : 0

# PE 3 and PE 4 can ping each other.

# CE 3 and CE 4 can ping each other.

Configuring IPv6 MCE

Network requirements

As shown in Figure 67, VPN 2 runs RIPng. Configure the MCE device to separate routes from different

VPNs and advertise the VPN routes to PE 1 through OSPFv3.