HP MSR2000/3000/4000 Router Series Security Command Reference

298
new2
pub2
# Display detailed information about the files and sub-directories under the current working directory in
the form of a list.
sftp> dir –l
-rwxrwxrwx 1 noone nogroup 1759 Aug 23 06:52 config.cfg
-rwxrwxrwx 1 noone nogroup 225 Aug 24 08:01 pubkey2
-rwxrwxrwx 1 noone nogroup 283 Aug 24 07:39 pubkey1
-rwxrwxrwx 1 noone nogroup 225 Sep 28 08:28 pub1
drwxrwxrwx 1 noone nogroup 0 Sep 28 08:24 new1
drwxrwxrwx 1 noone nogroup 0 Sep 28 08:18 new2
-rwxrwxrwx 1 noone nogroup 225 Sep 28 08:30 pub2
NOTE:
The output format depends on the device model.
display sftp client source
Use display sftp client source to display the source IP address or source interface configured for the SFTP
client.
Syntax
display sftp client source
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the source IP address configured for the SFTP client.
<Sysname> display sftp client source
The source IP address of the SFTP client is 192.168.0.1
The source IPv6 address of the SFTP client is 2:2::2:2.
Related commands
• sftp client ipv6 source
• sftp client source
display ssh client source
Use display ssh client source to display the source IP address or source interface configured for the
Stelnet client.
Syntax
display ssh client source