HP MSR2000/3000/4000 Router Series Security Command Reference

330
Responder->Initiator: 0 packets 0 bytes
Total sessions found: 2
Table 42 Command output
Field Descri
p
tion
Initiator
Session information for the connection from initiator to
responder.
Responder
Session information for the connection from responder to
initiator.
Source IP/port Source IP address and port number.
Dest IP/port Destination IP address and port number.
VPN-instance/VLAN ID/VLL ID
• VPN-instance—MPLS L3VPN where the session is initiated.
• VLAN ID—Layer 2 VLAN ID to forward the session.
• VLL ID—Layer 2 INLINE to forward the session.
If no VPN, VLAN ID, or VLL ID is specified, this field displays a
hyphen(-).
Protocol
Transport layer protocols, including DCCP, ICMP, ICMPv6,
Raw IP, SCTP, TCP, UDP, and UDP-Lite.
Number in parentheses represents the protocol number.
State Protocol status of the session.
Application
Application layer protocol.
INVALID specifies an unknown protocol, which uses an
unknown port.
Start time Establishment time of the session.
TTL Remaining lifetime of the session, in seconds.
Interface(in) Inbound interface of the session.
Interface(out) Outbound interface of the session.
Initiator->Responder Number of packets and bytes from initiator to responder.
Responder->Initiator Number of packets and bytes from responder to initiator.
Related commands
reset aspf session
icmp-error drop
Use icmp-error drop to enable ICMP error message check and drop those failed the check.
Use undo icmp-error drop to restore the default.
Syntax
icmp-error drop
undo icmp-error drop