HP MSR2000/3000/4000 Router Series Security Command Reference

361
destination-ip destination-ip: Specifies a destination IP address. The destination-ip argument specifies
the destination IP address of a session from the initiator to the responder.
verbose: Displays detailed information about session entries. If you do not provide this keyword, this
command displays brief information about session entries.
Usage guidelines
If no card is specified, this command displays the session entries that match specific criteria on all cards.
(MSR4000)
If no parameter is specified, this command displays all IPv4 or IPv6 session entries.
Examples
# Display brief information about all IPv4 session entries. (MSR2000/MSR3000)
<Sysname> display session table ipv4
Initiator:
Source IP/port: 192.168.1.18/1877
Destination IP/port: 192.168.1.55/22
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: TCP(6)
Initiator:
Source IP/port: 192.168.1.18/1792
Destination IP/port: 192.168.1.55/2048
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Total sessions found: 2
# Display brief information about all IPv4 session entries. (MSR4000)
<Sysname> display session table ipv4
Slot 0:
Initiator:
Source IP/port: 192.168.1.18/1877
Destination IP/port: 192.168.1.55/22
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: TCP(6)
Initiator:
Source IP/port: 192.168.1.18/1792
Destination IP/port: 192.168.1.55/2048
VPN instance/VLAN ID/VLL ID: -/-/-
Protocol: ICMP(1)
Total sessions found: 2
# Display detailed information about all IPv4 session entries. (MSR2000/MSR3000)
<Sysname> display session table ipv4 verbose
Initiator:
Source IP/port: 192.168.1.18/1877
Destination IP/port: 192.168.1.55/22
VPN instance/VLAN ID/VLL ID: -/-/-