4000 Router Series Security Command Reference

369

Related commands

display session statistics

reset session relation-table

Use reset session relation-table to clear relation entries.

Syntax

MSR2000/MSR3000:

reset session relation-table [ ipv4 | ipv6 ]

MSR4000:

reset session relation-table [ ipv4 | ipv6 ] [ slot slot-number ]

Views

User view

Predefined user roles

network-admin

Parameters

ipv4: Specifies IPv4 relation entries.

ipv6: Specifies IPv6 relation entries.

slot slot-number: Specifies a card by its slot number. (MSR4000)

Usage guidelines

If neither the IPv4 keyword nor the IPv6 keyword is specified, this command clears all IPv4 and IPv6

relation entries.

If no card is specified, this command clears the relation entries on all cards. (MSR4000)

Examples

# Clear all IPv4 relation entries.

<Sysname> reset session relation-table ipv4

Related commands

display session relation-table

session aging-time application

Use session aging-time application to set the aging time for sessions of an application layer protocol.

Use undo session aging-time application to restore the default. If no application layer protocol is

specified, this command restores the aging time for all sessions of the supported application layer

protocols to the default.

Syntax

session aging-time application { dns | ftp | gtp | h225 | h245 | ras | rtsp | sip | tftp } time-value

undo session aging-time application [ dns | ftp | gtp | h225 | h245 | ras | rtsp | sip | tftp ]