HP MSR2000/3000/4000 Router Series Security Command Reference

443
Parameters
max-number: Specifies the maximum number of online portal users. The value range for this argument is
1 to 4294967295.
Usage guidelines
If you configure a maximum number of portal users smaller than the number of online portal users, this
command still takes effect. The online users are not affected by this command, but the system forbids new
portal users to log in.
This command set the maximum number of online IPv4 and IPv6 portal users in all.
Examples
# Set the maximum number of online portal users to 100.
<Sysname> system-view
[Sysname] portal max-user 100
Related commands
display portal user
portal roaming enable
Use portal roaming enable to enable portal roaming.
Use undo portal roaming enable to disable portal roaming.
Syntax
portal roaming enable
undo portal roaming enable
Default
Portal roaming is disabled. An online portal user cannot roam in its VLAN.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command applies only to portal users that log in from VLAN interfaces.
If portal roaming is enabled, an online portal user can access network resources from any Layer 2 port
in its local VLAN. If portal roaming is disabled, the portal user can access network resources only from
the Layer 2 port on which it passes authentication.
This command can be executed only when no user is online.
Examples
# Enable portal roaming.
<Sysname> system-view
[Sysname] portal roaming enable