HP MSR2000/3000/4000 Router Series Security Configuration Guide

92
Ste
p
Command
1. Enter system view.
system-view
2. Display local host public keys
in a specific format.
• Display RSA host public keys:
{ In non-FIPS mode:
public-key local export rsa [ name key-name ] { openssh | ssh1 |
ssh2 }
{ In FIPS mode:
public-key local export rsa [ name key-name ] { openssh | ssh2 }
• Display RSA host public keys:
public-key local export rsa [ name key-name ] { openssh | ssh1 |
ssh2 }
• Display DSA host public keys:
public-key local export dsa [ name key-name ] { openssh | ssh2 }
Displaying a host public key
Display a host public key and copy it to an unformatted file. You must literally enter the key on the peer
device.
Perform the following tasks in any view:
Task Command
Display local RSA public keys. display public-key local rsa public [ name key-name ]
Display local DSA public keys. display public-key local dsa public [ name key-name ]
NOTE:
Do not distribute the RSA server public key serverkey (default) to a peer device.
Destroying a local key pair
To avoid key compromise, destroy a local key pair and generate a new pair after an intrusion event has
occurred, the storage media of the device is replaced, the key pair has been used for a long time, or the
local certificate has expired. For more information about the local certificate, see "Configuring PKI."
To destroy a local key pair:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Destroy a local key pair.
public-key local destroy { dsa |
ecdsa | rsa } [ name key-name ]
N/A