4000 Router Series Security Configuration Guide

228

Figure 55 Specifying the host name (or IP address)

c. Click Open to connect to the server.

If the connection is successfully established, the system asks you to enter the username and

password. After entering the username (client001) and password (aabbcc), you can enter the CLI

of the server.

Publickey authentication enabled Stelnet server configuration

example

Network requirements

As shown in Figure 56, you can log in to the router through the Stelnet client (SSH2) that runs on the host

and are assigned the user role network-admin for configuration management. The router acts as the

Stelnet server and uses publickey authentication and the RSA public key algorithm.

Figure 56 Network diagram

Stelnet client Stelnet server

Host Router

192.168.1.56/24

Eth1/1

192.168.1.40/24