HP MSR2000/3000/4000 Router Series Security Configuration Guide
234
Configuration procedure
1. Configure the Stelnet server:
# Generate the RSA key pairs.
<RouterB> system-view
[RouterB] public-key local create rsa
The range of public key size is (512 ~ 2048).
If the key modulus is greater than 512, it will take a few minutes.
Press CTRL+C to abort.
Input the modulus length [default = 1024]:
Generating Keys...
........................++++++
...................++++++
..++++++++
............++++++++
Create the key pair successfully.
# Enable the SSH server function.
[RouterB] ssh server enable
# Assign an IP address to interface Ethernet 1/1. The Stelnet client uses this address as the
destination address for SSH connection.
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] ip address 192.168.1.40 255.255.255.0
[RouterB-Ethernet1/1] quit
# Set the authentication mode for the user lines to AAA.
[RouterB] line vty 0 15
[RouterB-line-vty0-15] authentication-mode scheme
[RouterB-line-vty0-15] quit
# Create a local device management user client001 with the plaintext password aabbcc, the
service type ssh, and the user role network-admin.
[RouterB] local-user client001 class manage
[RouterB-luser-manage-client001] password simple aabbcc
[RouterB-luser-manage-client001] service-type ssh
[RouterB-luser-manage-client001] authorization-attribute user-role network-admin
[RouterB-luser-manage-client001] quit
# Create an SSH user client001 with the service type stelnet and the authentication method
password. (Optional. If an SSH user is not created, password authentication is used by default.)
[RouterB] ssh user client001 service-type stelnet authentication-type password
2. Establish a connection to the Stelnet server 192.168.1.40:
# Assign an IP address to interface Ethernet 1/1.
<RouterA> system-views
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] ip address 192.168.1.56 255.255.255.0
[RouterA-Ethernet1/1] quit
[RouterA] quit
You can determine whether to configure the host public key of the server on the client before
establishing a connection to the server: