HP MSR2000/3000/4000 Router Series Security Configuration Guide

311
To log out users:
Ste
p
Command
1. Enter system view.
system-view
2. Log out IPv4 portal users.
portal delete-user { ipv4-address | all | interface interface-type
interface-number }
3. Log out IPv6 portal users.
portal delete-user { all | interface interface-type interface-number |
ipv6 ipv6-address }
Displaying and maintaining portal
Execute display commands in any view and the reset command in user view.
Task Command
Display portal rules on an interface (centralized
devices).
display portal rule { all | dynamic | static } interface
interface-type interface-number
Display portal rules on an interface (distributed
devices).
display portal rule { all | dynamic | static } interface
interface-type interface-number [ slot slot-id ]
Display portal configuration and portal running state
information on an interface.
display portal interface interface-type
interface-number
Display portal authentication server information. display portal server [ server-name ]
Display portal Web server information. display portal web-server [ server-name ]
Display packet statistics for portal authentication
servers.
display portal packet statistics [ server server-name ]
Display portal user information.
display portal user { all | interface interface-type
interface-number }
Clear packet statistics for portal authentication
servers.
reset portal packet statistics [ server server-name ]
Portal configuration examples
Configuring direct portal authentication
Network requirements
As shown in Figure 88, the host is directly connected to the router (the access device). The host is
assigned with a public IP address either manually or through DHCP. A portal server serves as both a
portal authentication server and a portal Web server. A RADIUS server serves as the
authentication/authorization server.
Configure direct portal authentication, so the host can access only the portal server before passing the
authentication and access Internet resources after passing the authentication.