4000 Router Series Security Configuration Guide

312

Figure 88 Network diagram

Configuration prerequisites

• Configure IP addresses for the host, router, and servers as shown in Figure 88 and make sure they

can reach each other.

• Configure the RADIUS server correctly to provide authentication/authorization functions.

Configuring the portal authentication server

This example assumes that the portal server runs on IMC PLAT 5.1 SP1 (E0202P05) and IMC UAM 5.1

(E0301).

1. Configure the portal authentication server:

a. Log in to IMC and click the Service tab.

b. Select User Access Manager > Portal Service > Server from the navigation tree to enter the

portal server configuration page, as shown in Figure 89.

c. Conf

igure the portal server parameters as needed.

This example uses the default settings.

d. Click OK.

Figure 89 Portal server configuration

2. Configure the IP address group: