HP MSR2000/3000/4000 Router Series Security Configuration Guide

39
3. Determine whether to configure the default accounting method for all access types or service types.
The default accounting method applies to all access users, but it has a lower priority than the
accounting method that is specified for an access type or service type.
Configuration guidelines
When configuring accounting methods, follow these guidelines:
• Login users who use FTP services do not support accounting.
• Local accounting does not provide statistics for charging. It only counts and controls the number of
concurrent users who use the same local user account. The threshold is configured by using the
access-limit enable command.
Configuration procedure
To configure accounting methods for an ISP domain:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter ISP domain view.
domain isp-name N/A
3. Specify the default
accounting method for all
types of users.
accounting default { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
By default, the accounting
method is local.
The none keyword is not
supported in FIPS mode.
4. Specify the command
accounting method.
accounting command hwtacacs-scheme
hwtacacs-scheme-name
By default, the default
accounting method is used
for command accounting.
5. Specify the accounting
method for LAN users.
accounting lan-access { local [ none ] |
none | radius-scheme radius-scheme-name
[ local ] [ none ] }
By default, the default
accounting method is used
for LAN users.
The none keyword is not
supported in FIPS mode.
6. Specify the accounting
method for login users.
accounting login { hwtacacs-scheme
hwtacacs-scheme-name [ radius-scheme
radius-scheme-name ] [ local ] [ none ] |
local [ none ] | none | radius-scheme
radius-scheme-name [ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ] }
By default, the default
accounting method is used
for login users.
The none keyword is not
supported in FIPS mode.
7. Specify the accounting
method for PPP users.
accounting ppp { local [ none ] | none |
radius-scheme radius-scheme-name [ local ]
[ none ] }
By default, the default
accounting method is used
for PPP users.
The none keyword is not
supported in FIPS mode.