HP MSR2000/3000/4000 Router Series Security Configuration Guide

65
To configure the quiet timer:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable the quiet timer.
dot1x quiet-period By default, the timer is disabled.
3. (Optional.) Set the quiet timer.
dot1x timer quiet-period
quiet-period-value
The default is 60 seconds.
Enabling the periodic online user re-authentication
function
Periodic online user re-authentication tracks the connection status of online users, and updates the
authorization attributes assigned by the server. The re-authentication interval is user configurable.
The periodic online user re-authentication timer can also be set by the authentication server in the
session-timeout attribute. The server-assigned timer overrides the timer setting on the access device, and
enables periodic online user re-authentication, even if the function is not configured. Support for the
server assignment of re-authentication timer and the re-authentication timer configuration on the server
vary with servers.
To enable the periodic online user re-authentication function:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. (Optional.) Set the periodic
re-authentication timer.
dot1x timer reauth-period
reauth-period-value
The default is 3600 seconds.
3. Enter Layer 2 Ethernet
interface view.
interface interface-type
interface-number
N/A
4. Enable periodic online user
re-authentication.
dot1x re-authenticate By default, the function is disabled.
Displaying and maintaining 802.1X
Execute the display commands in any view and the reset commands in user view.
Task Command
Display 802.1X session information, statistics,
or configuration information of specified or all
ports.
display dot1x [ sessions | statistics ] [ interface interface-type
interface-number ]
Clear 802.1X statistics.
reset dot1x statistics [ interface interface-type
interface-number ]