R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

38
Table 15 Available match criteria
O
p
tion Descri
p
tion
acl [ ipv6 ] { acl-number | name
acl-name }
Matches an ACL.
The acl-number argument ranges from 2000 to 5999 for an IPv4 ACL, and
2000 to 3999 or 10000 to 42767 for an IPv6 ACL.
The acl-name argument is a case-insensitive string of 1 to 63 characters,
which must start with an English letter. To avoid confusion, the argument
cannot be all.
app-group group-name
Matches an application group.
The group-name argument specifies a system-defined application group by
its name.
application app-name
Matches an application.
The app-name argument specifies a system-defined application by its name.
any Matches all packets.
classifier classifier-name
Matches a class.
The classifier-name argument specifies a class by its name.
control-plane protocol
protocol-name&<1-8>
Matches control plane protocols.
The protocol-name-list&<1-8> argument is a list of system-defined control
plane protocols. For available system-defined control plane protocols,
see Table 16. &
<1-8> indicates that you can enter up to eight system-defined
control plane protocols.
control-plane protocol-group
protocol-group-name
Matches the control plane protocol group.
The protocol-group-name argument can be critical, exception, important,
management, monitor, normal, or redirect.
customer-dot1p
dot1p-value&<1-8>
Matches 802.1p priority values of the customer network.
The dot1p-value&<1-8> argument is a list of 802.1p priority values. An
802.1p priority ranges from 0 to 7. &<1-8> indicates that you can enter up
to eight 802.1p priority values.
customer-vlan-id vlan-id-list
Matches customer VLAN IDs (CVLANs).
The vlan-id-list argument is in the format of vlan-id-list = { vlan-id | vlan-id1 to
vlan-id2 }&<1-10>, where the vlan-id, vlan-id1, and vlan-id2 arguments
represent the VLAN IDs and each range from 1 to 4094, vlan-id1 must be no
greater than vlan-id2, and &<1-10> indicates that you can specify up to 10
VLAN IDs or VLAN ID ranges.
destination-mac mac-address Matches a destination MAC address.
dscp dscp-value&<1-8>
Matches DSCP values.
The dscp-value&<1-8> argument is a list of DSCP values. A DSCP value
ranges from 0 to 63 or can be a keyword shown in Table 18. &<
1-8>
indicates that you can enter up to eight DSCP values.
inbound-interface
interface-type interface-number
Matches an incoming interface specified by its type and number.
ip-precedence
ip-precedence-value&<1-8>
Matches IP precedence values.
The ip-precedence-value&<1-8> argument is a list of IP precedence values.
An IP precedence ranges from 0 to 7. &<1-8> indicates that you can enter
up to eight IP precedence values.