R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

1
ACL commands
In this chapter, "MSR2000" refers to MSR2003. "MSR3000" collectively refers to MSR3012, MSR3024,
MSR3044, MSR3064. "MSR4000" collectively refers to MSR4060 and MSR4080.
acl
Use acl to create an ACL, and enter its view. If the ACL has been created, you directly enter its view.
Use undo acl to delete the specified or all ACLs.
Syntax
acl [ ipv6 ] number acl-number [ name acl-name ] [ match-order { auto | config } ]
undo acl [ ipv6 ] { all | name acl-name | number acl-number }
Default
No ACL exists.
Views
System view
Predefined user roles
network-admin
Parameters
number acl-number: Specifies the number of an ACL:
• 2000 to 2999 for IPv4 basic ACLs if the ipv6 keyword is not specified and for IPv6 basic ACLs if
the ipv6 keyword is specified.
• 3000 to 3999 for IPv4 advanced ACLs if the ipv6 keyword is not specified and for IPv6 advanced
ACLs if the ipv6 keyword is specified.
• 4000 to 4999 for Ethernet frame header ACLs. This entry is not displayed if the ipv6 keyword is
specified.
name acl-name: Assigns a name to the ACL for easy identification. The acl-name argument is a
case-insensitive string of 1 to 63 characters. It must start with an English letter and to avoid confusion, it
cannot be all.
match-order: Sets the order in which ACL rules are compared against packets.
• auto: Compares ACL rules in depth-first order. The depth-first order varies by ACL category. For
more information, see ACL and QoS Configuration Guide.
• config: Compares ACL rules in ascending order of rule ID. The rule with a smaller ID has higher
priority. If you do not specify a match order, the config-order applies by default.
all: Specifies all ACLs.
• If the ipv6 keyword is not specified, all ACLs refer to all IPv4 basic, IPv4 advanced, and Ethernet
frame header ACLs.
• If the ipv6 keyword is specified, all ACLs refer to all IPv6 basic and IPv6 advanced ACLs.