R0106-HP MSR Router Series ACL and QoS Command Reference(V7)

76
Priority mapping commands
Priority map commands
display qos map-table
Use display qos map-table to display the configuration of a priority map.
Syntax
display qos map-table [ dot1p-lp | dscp-lp ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
inbound: Specifies the priority maps for incoming packets.
outbound: Specifies the priority maps for outgoing packets.
The router provides the following types of priority map.
Table 24 Priority maps
Priorit
y
ma
p
Descri
p
tion
dot1p-lp 802.1p-local priority map.
dscp-lp DSCP-local priority map.
Usage guidelines
If no priority map is specified, this command displays the configuration information of all priority maps.
If no direction is specified, this command displays the priority maps in any direction.
If no parameter is specified, this command displays all priority maps.
Examples
# Display the configuration of the 802.1p-local priority map.
<Sysname> display qos map-table dot1p-lp
MAP-TABLE NAME: dot1p-lp TYPE: pre-define
IMPORT : EXPORT
0 : 2
1 : 0
2 : 1
3 : 3
4 : 4