R0106-HP MSR Router Series Fundamentals Configuration Guide(V7)

137
Managing the device
This chapter describes how to configure basic device parameters and manage the device.
You can perform the configuration tasks in this chapter in any order.
In this chapter,"MSR2000" refers to MSR2003. "MSR3000" collectively refers to MSR3012, MSR3024,
MSR3044, MSR3064. "MSR4000" collectively refers to MSR4060 and MSR4080.
Device management task list
Tasks at a
g
lance
(Required.) Configuring the device name
(Required.) Configuring the system time
(Optional.) Enabling displaying the copyright statement
(Optional.) Configuring banners
(Optional.) Rebooting the device
(Optional.) Scheduling a task
(Optional.) Installing/removing HMIM modules
(Optional.) Disabling password recovery capability
(Required.) Managing power supply
(Optional.) Setting the port status detection timer
(Optional.) Monitoring CPU usage
(Required.) Setting memory usage thresholds
(Optional.) Disabling all USB interfaces
(Required.) Setting the operating mode of an interface card
(Required.) Verifying and diagnosing transceiver modules
(Optional.) Restoring the factory-default configuration
Configuring the device name
A device name, or hostname, identifies a device in a network and is used as the user view prompt at the
CLI. For example, if the device name is Sysname, the user view prompt is <Sysname>.
To configure the device name:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the device name.
sysname sysname The default device name is HP.