R0106-HP MSR Router Series High Availability Command Reference(V7)

6
• If you have associated a backup interface with a track entry, you cannot configure the backup
interface command on it or specify it as a backup interface by using the backup interface
command.
Examples
# Associate Serial 2/1/0 with track entry 1.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] backup track 1
Related commands
backup interface
display interface-backup state
Use display interface-backup state to display state information for primary and backup interfaces.
Syntax
display interface-backup state
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display state information for primary and backup interfaces.
<Sysname> display interface-backup state
Interface: GE2/1/1
UpDelay: 10 s
DownDelay: 5 s
State: UP
Backup interfaces:
GE2/1/2 Priority: 30 State: STANDBY
GE2/1/3 Priority: 20 State: STANDBY
Interface: GE2/1/5
UpDelay: 10 s
DownDelay: 5 s
Upper threshold: 80
Lower threshold: 20
State: DOWN
Backup interfaces:
GE2/1/6 Priority: 30 State: UP_DELAY
GE2/1/7 Priority: 20 State: STANDBY
IB Track Information:
GE2/1/4 Track: 1 State: STANDBY