R0106-HP MSR Router Series High Availability Command Reference(V7)

10
VRRP commands
VRRP cannot be configured on member ports of aggregation groups.
IPv4 VRRP commands
display vrrp
Use display vrrp to display the states of IPv4 VRRP groups.
Syntax
display vrrp [ interface interface-type interface-number [ vrid virtual-router-id ] ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vrid virtual-router-id: Specifies an IPv4 VRRP group by its virtual router ID in the range of 1 to 255.
verbose: Displays detailed IPv4 VRRP group information. If you do not specify this keyword, this
command displays brief IPv4 VRRP group information.
Usage guidelines
• If no interface or VRRP group is specified, this command displays the states of all IPv4 VRRP groups.
• If only an interface is specified, this command displays the states of all IPv4 VRRP groups on the
specified interface.
• If both an interface and an IPv4 VRRP group are specified, this command displays the states of the
specified IPv4 VRRP group on the specified interface.
Examples
# Display brief information about all IPv4 VRRP groups on the device when VRRP operates in standard
mode.
<Sysname> display vrrp
IPv4 Virtual Router Information:
Running Mode : Standard
Total number of virtual routers : 1
Interface VRID State Running Adver Auth Virtual
Pri Timer Type IP
---------------------------------------------------------------------
GE2/0/1 1 Master 150 100 Simple 1.1.1.1