R0106-HP MSR Router Series High Availability Command Reference(V7)

24
undo vrrp mode
Default
IPv4 VRRP operates in standard mode.
Views
System view
Predefined user roles
network-admin
Parameters
load-balance: Specifies the load balancing mode.
Usage guidelines
After you create IPv4 VRRP groups on the router, you can specify their operating mode by using this
command. All IPv4 VRRP groups on the router operate in the specified mode.
Examples
# Specify the load balancing mode for IPv4 VRRP.
<Sysname> system-view
[Sysname] vrrp mode load-balance
Related commands
display vrrp
vrrp version
Use vrrp version to specify the version of IPv4 VRRP on an interface.
Use undo vrrp version to restore the default.
Syntax
vrrp version version-number
undo vrrp version
Default
VRRPv3 is used.
Views
Interface view
Predefined user roles
network-admin
Parameters
version-number: Specifies a VRRP version. The version number is 2 or 3, where 2 indicates VRRPv2
(described in RFC 3768), and 3 indicates VRRPv3 (described in RFC 5798).
Usage guidelines
The version of VRRP on all routers in an IPv4 VRRP group must be the same.
Examples
# Specify VRRPv2 to run on interface GigabitEthernet 2/0/1.