R0106-HP MSR Router Series High Availability Command Reference(V7)

29
Default
No source interface is specified for a VRRP group. The interface where the VRRP group resides sends and
receives VRRP packets.
Views
Interface view
Predefined user roles
network-admin
Parameters
virtual-router-id: Specifies an IPv4 VRRP group by its virtual router ID in the range of 1 to 255.
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If VRRP group members cannot exchange VRRP packets through the interfaces where the VRRP group
resides, you can use this command to enable VRRP packet exchange among VRRP group members
through the specified source interfaces.
Examples
# Specify GigabitEthernet 2/0/2 as the source interface for VRRP packet exchange in IPv4 VRRP group
10.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] vrrp vrid 10 source-interface gigabitethernet 2/0/2
vrrp vrid timer advertise
Use vrrp vrid timer advertise to configure the interval at which the master in an IPv4 VRRP group sends
VRRP advertisements.
Use undo vrrp vrid timer advertise to restore the default.
Syntax
vrrp vrid virtual-router-id timer advertise adver-interval
undo vrrp vrid virtual-router-id timer advertise
Default
The master in an IPv4 VRRP group sends VRRP advertisements at an interval of 100 centiseconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
virtual-router-id: Specifies an IPv4 VRRP group by its virtual router ID in the range of 1 to 255.
adver-interval: Specifies an interval for the master in the specified IPv4 VRRP group to send VRRP
advertisements. The value range for this argument is 10 to 4095 centiseconds. For VRRPv2, the value of
the adver-interval argument can only be a multiple of 100. For example, if you configure values in the