R0106-HP MSR Router Series High Availability Command Reference(V7)

36
Field Descri
p
tion
State
Status of the router in the VRRP group:
• Master.
• Backup.
• Initialize.
• Inactive.
Config Pri
Configured priority of the router, which is configured through the vrrp ipv6
vrid priority command.
Running Pri
Current priority of the router.
When a track entry is associated with a VRRP group on the router, the
router's priority changes when the track entry's status changes.
Preempt Mode
Preemptive mode:
• Yes.
• No.
Delay Time Preemption delay time in seconds.
Become Master
Time, in milliseconds, that a backup router has to wait before it becomes the
master.
Auth Type
Authentication type. Only none is available, which means no authentication
is required.
Virtual IP Virtual IP address of the VRRP group.
Virtual MAC
Virtual MAC address of the VRRP group's virtual IP address, which is
displayed when the router is the master.
Master IP Link-local address of the interface where the master resides.
VRRP Track Information
Track entry information. This field is displayed only after you have
configured the vrrp ipv6 vrid track command.
Track Object Track entry which is associated with the VRRP group.
State
Track entry state:
• Negative.
• Positive.
• NotReady.
Pri Reduced
Value by which the priority decreases when the status of the associated
track entry becomes negative.
Switchover
Switchover mode. When the status of the associated track entry becomes
negative, the backup immediately becomes the master.
# Display brief information about all IPv6 VRRP groups on the device when VRRP operates in load
balancing mode.
<Sysname> display vrrp ipv6
IPv6 Virtual Router Information:
Running Mode : Load Balance
Total number of virtual routers : 1
Interface VRID State Running Address Active
Pri
----------------------------------------------------------------------