R0106-HP MSR Router Series High Availability Command Reference(V7)

39
Table 13 Command output (in load balancing mode)
Field Descri
p
tion
Running Mode VRRP operating mode (load balancing mode).
Total number of virtual routers Total number of VRRP groups.
Interface Interface where the VRRP group is configured.
VRID Virtual router ID (VRRP group number)
Adver Timer VRRP advertisement sending interval in centiseconds.
Admin Status Administrative status: up or down.
State
Status of the router in the VRRP group:
• Master.
• Backup.
• Initialize.
• Inactive.
Config Pri
Configured priority of the router, which is configured through the vrrp ipv6
vrid priority command.
Running Pri
Current priority of the router.
When a track entry is associated with a VRRP group on the router, the
router's priority changes when the track entry's status changes.
Preempt Mode
Preemptive mode:
• Yes.
• No.
Delay Time Preemption delay time in seconds.
Become Master
Time, in milliseconds, that a backup router has to wait before it becomes the
master.
Auth Type
Authentication type. Only none is available, which means no authentication
is required.
Virtual IP Virtual IP address list of the VRRP group.
Member IP List
IP addresses of the member devices in the VRRP group:
• Local—IP address of the local router.
• Master—IP address of the master.
• Backup—IP address of the backup.
VRRP Track Information
Track entry which is associated with the VRRP group. This field is displayed
only after you have configured the vrrp ipv6 vrid track command.
Track Object
Track entry to be monitored. This field is displayed only after you have
configured the vrrp ipv6 vrid track command.
State
Track entry state:
• Negative.
• Positive.
• NotReady.
Pri Reduced
Value by which the priority decreases when the status of the associated
track entry becomes negative. This field is displayed only after you have
configured vrrp ipv6 vrid track command.