R0106-HP MSR Router Series High Availability Command Reference(V7)

58
<Sysname> system-view
[Sysname] bfd echo-source-ipv6 80::2
bfd min-echo-receive-interval
Use bfd min-echo-receive-interval to configure the minimum interval for receiving BFD echo packets.
Use undo bfd min-echo-receive-interval to restore the default.
Syntax
bfd min-echo-receive-interval value
undo bfd min-echo-receive-interval
Default
The minimum interval for receiving BFD echo packets is 1000 milliseconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
value: Specifies a minimum interval for receiving BFD echo packets, in the range of 10 to 10000
milliseconds.
Usage guidelines
This command sets the BFD echo packet receiving interval, which is the actual BFD echo packet sending
interval.
Examples
# Configure the minimum interval for receiving BFD echo packets on GigabitEthernet 2/0/1 as 500
milliseconds.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] bfd min-echo-receive-interval 500
bfd min-receive-interval
Use bfd min-receive-interval to configure the minimum interval for receiving single-hop BFD control
packets.
Use undo bfd min-receive-interval to restore the default.
Syntax
bfd min-receive-interval value
undo bfd min-receive-interval
Default
The minimum interval for receiving single-hop BFD control packets is 1000 milliseconds.
Views
Interface view