R0106-HP MSR Router Series High Availability Command Reference(V7)

82
aaa 0/0
Table 22 Command output
Field Descri
p
tion
Program Process name.
Placed at location
Location of the process.
If NA is displayed, the process is not available because the service is abnormal
or the process is starting up or shut down.
display placement reoptimize
Use display placement reoptimize to display the predicted changes that will occur when you run the
placement reoptimize command.
Syntax
display placement reoptimize program { program-name [ instance instance-name ] | all }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
program-name: Displays changes for a process (that supports process optimization) specified by its
name, a case-insensitive string of 1 to 15 characters.
instance instance-name: Specifies an instance of the specified process by name, a case-insensitive string
of 1 to 15 characters. Whether a process has multiple instances depends on the system software.
all: Displays changes for all processes that support process optimization.
Examples
# Display the predicted changes for all processes.
<Sysname> display placement reoptimize program all
Predicted changes to the placement
Program Current location New location
---------------------------------------------------------------------
rm6 1/0 1/0
rm 1/0 1/0
rpm 1/0 1/0
usr 1/0 1/0
usr6 1/0 1/0
bgp 1/0 1/0
pim 1/0 1/0
igmp 1/0 1/0
The output shows the process name, current location of the active process, and new location of the active
process after optimization.