R0106-HP MSR Router Series High Availability Command Reference(V7)

84
[Sysname-program-bgp-100]
# Enter default placement process view.
<Sysname> system-view
[Sysname] placement program default
[Sysname-program-default]
placement reoptimize
Use placement reoptimize to apply configured process placement policies for optimizing process
placement.
Syntax
placement reoptimize
Views
System view
Predefined user roles
network-admin
Usage guidelines
After you issue this command, the system bases its placement decisions on the new process placement
policies, hardware resources, and locations and states of active processes. If the new location for an
active process is different from its current location, the system changes its state to standby and the state
of the standby process on the new location to active. This active/standby switchover does not interrupt
running services because no process is restarted.
To keep the system stable, HP recommends not performing any operation that requires process restart
when you execute this command.
Examples
# Reoptimize process placement.
<Sysname> system-view
[Sysname] placement reoptimize
Predicted changes to the placement
Program Current location New location
---------------------------------------------------------------------
syslog 0/0 0/0
l3vpn 0/0 0/0
aaa 0/0 0/0
lauth 0/0 0/0
lsm 0/0 0/0
ip6addr 0/0 0/0
ip6base 0/0 0/0
rm 0/0 0/0
ipcfg 0/0 0/0
acl 0/0 0/0
tunnel 0/0 0/0
lagg 0/0 0/0
qos 0/0 0/0
ipcim 0/0 0/0