R0106-HP MSR Router Series High Availability Configuration Guide(V7)

[RouterA] nqa entry admin test

# Configure the operation type as ICMP echo.

[RouterA-nqa-admin-test] type icmp-echo

# Configure the destination address of the operation as 10.2.1.4 and the next hop address as

10.1.1.2.

[RouterA-nqa-admin-test-icmp-echo] destination ip 10.2.1.4

[RouterA-nqa-admin-test-icmp-echo] next-hop 10.1.1.2

# Configure the ICMP echo operation to repeat at an interval of 100 milliseconds.

[RouterA-nqa-admin-test-icmp-echo] frequency 100

# Configure reaction entry 1, specifying that five consecutive probe failures trigger the Track

module.

[RouterA-nqa-admin-test-icmp-echo] reaction 1 checked-element probe-fail

threshold-type consecutive 5 action-type trigger-only

[RouterA-nqa-admin-test-icmp-echo] quit

# Start the NQA operation.

[RouterA] nqa schedule admin test start-time now lifetime forever

# Configure track entry 1, and associate it with reaction entry 1 of the NQA operation.

[RouterA] track 1 nqa entry admin test reaction 1

3. Configure Router B:

# Configure a static route to 30.1.1.0/24 with the next hop 10.2.1.4.

<RouterB> system-view

[RouterB] ip route-static 30.1.1.0 24 10.2.1.4

# Configure a static route to 20.1.1.0/24 with the next hop 10.1.1.1.

[RouterB] ip route-static 20.1.1.0 24 10.1.1.1

4. Configure Router C:

# Configure a static route to 30.1.1.0/24 with the next hop 10.4.1.4.

<RouterC> system-view

[RouterC] ip route-static 30.1.1.0 24 10.4.1.4

# Configure a static route to 20.1.1.0/24 with the next hop 10.3.1.1.

[RouterC] ip route-static 20.1.1.0 24 10.3.1.1

5. Configure Router D:

# Configure a static route to 20.1.1.0/24 with the next hop 10.2.1.2 and the default priority 60,

and associate this static route with track entry 1.

<RouterD> system-view

[RouterD] ip route-static 20.1.1.0 24 10.2.1.2 track 1

# Configure a static route to 20.1.1.0/24 with the next hop 10.4.1.3 and the default priority 80.

[RouterD] ip route-static 20.1.1.0 24 10.4.1.3 preference 80

# Configure a static route to 10.1.1.1 with the next hop 10.2.1.2.

[RouterD] ip route-static 10.1.1.1 24 10.2.1.2

# Create an NQA operation with the administrator admin and the operation tag test.

[RouterD] nqa entry admin test

# Configure the operation type as ICMP echo.

[RouterD-nqa-admin-test] type icmp-echo

# Configure the destination address of the operation as 10.1.1.1 and the next hop address as

10.2.1.2.