R0106-HP MSR Router Series Interface Command Reference(V7)

93
Field Description
Data in current interval (150 seconds
elapsed):
Loss Frame Alignment: 0 seconds,
Framing Error: 0 seconds
CRC Error: 0 seconds, Alarm
Indication: 0 seconds
Loss-of-signals: 0 seconds, Code
Violations: 0 seconds
Slip: 0 seconds, E-Bit error: 0 seconds
Error statistics in the current interval.
Related commands
reset counters controller e1
frame-format (CE1/PRI interface)
Use frame-format to set the framing format for a CE1 interface.
Use undo frame-format to restore the default.
Syntax
frame-format { crc4 | no-crc4 }
undo frame-format
Default
The framing format on a CE1 interface is no-CRC4.
Views
CE1/PRI interface view
Predefined user roles
network-admin
Parameters
crc4: Sets the framing format to CRC4.
no-crc4: Sets the framing format to no-CRC4.
Usage guidelines
A CE1/PRI interface in CE1 mode supports both CRC4 and no-CRC4 framing formats. Only CRC4
supports four-bit CRC on physical frames.
Examples
# Set the framing format on E1 2/3/0 to CRC4.
<Sysname> system-view
[Sysname] controller e1 2/3/0
[Sysname-E1 2/3/0] frame-format crc4
idle-code (CE1/PRI interface)
Use idle-code to set the line idle code on a CE1/PRI interface.