R0106-HP MSR Router Series Interface Command Reference(V7)

111
pri-set (CT1/PRI interface)
Use pri-set to bundle timeslots into a PRI set on a CT1/PRI interface.
Use undo pri-set to remove the timeslot bundle.
Syntax
pri-set [ timeslot-list list ]
undo pri-set
Default
No PRI set is created.
Views
CT1/PRI interface view
Predefined user roles
network-admin
Parameters
timeslot-list list: Specifies a comma-separated list of timeslot items. An item can be an individual timeslot
or a timeslot range. Use a hyphen (-) to separate the start and end timeslot numbers of a range. The value
range for the list argument is 1 to 24.
Usage guidelines
When you create a PRI set on a CT1/PRI interface, timeslot 24 is the D channel for transmitting signaling,
and it cannot form a bundle that includes only itself. The attempts to bundle only timeslot 24 will fail.
In the PRI set, timeslot 24 is used as the D channel for signaling transmission. The other timeslots are used
as B channels for data transmission. You can randomly bundle these timeslots into a PRI set. The D
channel, timeslot 24, is automatically bundled. If no timeslot is specified, all timeslots are bundled into an
interface similar to an ISDN PRI interface in the form of 23B + D.
For the PRI set, the system automatically creates a serial interface that has the same logical features as an
ISDN PRI interface. The serial interface is named in the form of serial number:23, where number is the
number of the CT1/PRI interface on which the serial interface is created.
The timeslots on a CT1/PRI interface can be bundled into either channel sets or a PRI set, but not both at
the same time. Do not use this command with the channel-set command.
Examples
# Bundle timeslots 1, 2, and 8 through 12 into a PRI set on T1 2/4/0.
<Sysname> system-view
[Sysname] controller t1 2/4/0
[Sysname-T1 2/4/0] pri-set timeslot-list 1,2,8-12
Related commands
channel-set
reset counters controller t1
Use reset counters controller t1 to clear CT1/PRI interface statistics.