R0106-HP MSR Router Series Interface Command Reference(V7)

153
e1 unframed
Use e1 unframed to set an E1 line on a CE3 interface to operate in unframed mode (E1 mode).
Use undo e1 unframed to restore the default.
Syntax
e1 line-number unframed
undo e1 line-number unframed
Default
An E1 line operates in framed mode (CE1 mode).
Views
CE3 interface view
Predefined user roles
network-admin
Parameters
line-number: E1 line number in the range of 1 to 16.
Usage guidelines
An E1 line in unframed mode does not contain the frame control information or support timeslot division. .
The system automatically creates a 2048-kbps serial interface numbered serial number/line-number:0
for it. This interface has the same logical features as a standard synchronous serial interface. You can
configure this serial interface in the same way you configure a standard synchronous serial interface.
Examples
# Set E1 line 1 on E3 2/4/0 to operate in unframed mode.
<Sysname> system-view
[Sysname] controller e3 2/4/0
[Sysname-E3 2/4/0] e1 1 unframed
Related commands
e1 channel-set
fe3
Use fe3 to configure a CE3 interface to operate in FE3 mode and set the DSU mode or the subrate.
Use undo fe3 to restore the default.
Syntax
fe3 { dsu-mode { 0 | 1 } | subrate number }
undo fe3 { dsu-mode | subrate }
Default
DSU mode 1 (the Kentrox mode) is adopted, and the subrate is 34010 kbps.
Views
CE3 interface (in FE3 mode) view