R0106-HP MSR Router Series Interface Command Reference(V7)

199
controller cpos
Use controller cpos to enter CPOS interface view.
Syntax
controller cpos cpos-number
Views
System view
Predefined user roles
network-admin
Parameters
cpos-number: Specifies a CPOS interface by its number.
Examples
# Enter the interface view of CPOS 2/4/0.
<Sysname> system-view
[Sysname] controller cpos 2/4/0
[Sysname-Cpos2/4/0]
default
Use default to restore the default settings for the CPOS interface.
Syntax
default
Views
CPOS interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it on a live network.
This command might fail to restore the default settings for some commands because of command
dependencies or system restrictions. You can use the display this command in interface view to check for
these commands and perform their undo forms or follow the command reference to restore their default
settings. If your restoration attempt still fails, follow the error message to resolve the problem.
Examples
# Restore the default settings of CPOS 2/4/0.
<Sysname> system-view
[Sysname] controller cpos 2/4/0
[Sysname-Cpos2/4/0] default