R0106-HP MSR Router Series Interface Command Reference(V7)

204
display controller cpos t1
Use display controller cpos t1 to display status information for a T1 channel on a CPOS interface.
Syntax
display controller cpos cpos-number t1 t1-number
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
cpos-number: Specifies a CPOS interface by its number.
t1-number: Specifies a T1 channel by its number on a CPOS interface. The value range for this argument
is 1 to 84.
Usage guidelines
This command displays errors and alarms that occurred to lower-order paths and T1 frames.
Examples
# Display the status information of T1 channel 1 on CPOS 2/4/0.
<Sysname> display controller cpos 2/4/0 t1 1
Cpos2/4/0
Current state: DOWN
Description : Cpos2/4/0 Interface
Lower order path:
TxFlag: J2: "" LP-C2: 2
RxFlag: J2: "" LP-C2: 7
Alarm: LP-AIS LP-RDI LP-RFI LP-C2-Mismatched LP-J2-Unstable
Error: 1080 BIP2, 2047 FEBE
CT1 1 (1-1-1-1) is down
Frame-format: ESF, clock: slave, loopback: none
Alarm: AIS LFA Red
Error: 0 Bit Error, 0 Fer, 0 OOF
Table 24 Command output
Field Description
Current state Current physical state of the CPOS interface.
Description Interface description.
TxFlag: Transmitted overhead bytes.
RxFlag:
Received overhead bytes.
If the J2 overhead bytes are invisible characters, this field displays
RxFlag: J2: unknow.
Alarm Alarm statistics.