R0106-HP MSR Router Series Interface Command Reference(V7)

240
Attn(dB): 0.0 0.0
Pwr(dBm): 0.0 0.0
Current Rate(kbps): 0 0
Latency: Intl Intl
Table 27 Command output
Field Descri
p
tion
Line Status
ADSL line status:
• No Defect.
• Loss Of Frame.
• Loss Of Signal.
• Loss Of Power.
• Loss Of Signal Quality.
• Unknown.
Training Status
Status during the training with the digital subscriber line access multiplexer (DSLAM)
equipment:
• Idle.
• G.994 Training.
• G.992 Started.
• G.922 Channel Analysis.
• G.992 Message Exchange.
• Showtime (normal data exchange).
• Unknown.
The following information is displayed when the line is up:
Active Params
Near End indicates the downlink direction (in which packets are received). Far End
indicates the uplink direction (in which packets are transmitted).
Line activation parameters:
• Standard—Standard for the connection between the ADSL interface and the DSLAM
equipment.
• SNR—Current SNR. A high SNR value indicates a good line condition.
• Attn—Current attenuation. A large attenuation value indicates a poor line condition.
• Pwr—Current transmission power in dbm.
• Current Rate—ADSL line rate in kbps.
• Latency—Data coding mode, including Intl and Fast.
display dsl version
Use display dsl version to display the version information and available capabilities for an ADSL
interface.
Syntax
display dsl version interface atm interface-number
Views
Any view