R0106-HP MSR Router Series Interface Command Reference(V7)

43
Syntax
default
Views
AM interface view
CE1/PRI interface/CE3 interface/E1-F interface view
CT1/PRI interface/CT3 interface/T1-F interface view
FCM interface view
ISDN BRI interface view
Serial interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. You can use the display this command in interface view to check
for these commands, and use their undo forms or follow the command reference to restore their
respective default settings. If your restoration attempt still fails, follow the error message instructions to
resolve the problem.
Examples
# Restore the default settings of Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] default
description
Use description to configure a description for an interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
Interface description uses the interface name Interface format, for example, Serial2/1/0 Interface.
Views
AM interface view
CE1/PRI interface/CE3 interface/E1-F interface view
CT1/PRI interface/CT3 interface/T1-F interface view