R0106-HP MSR Router Series Interface Command Reference(V7)

Usage guidelines

If you do not specify the bri keyword, this command displays information about all interfaces on the

device.

If you specify the bri keyword without specifying an interface, this command displays information about

all BRI interfaces.

Examples

# Display detailed information about BRI 2/4/0.

<Sysname> display interface bri 2/4/0

Bri2/4/0

Current state: DOWN ( Administratively )

Line protocol state: UP (spoofing)

Description: Bri2/4/0 Interface

Bandwidth: 128kbps

Maximum Transmit Unit: 1500

Hold timer: 10 seconds

Baudrate: 128000 bps

Timeslot(s) Used: 1, 2

Internet protocol processing: disabled

Link layer protocol: PPP

LCP: initial

Output queue - Urgent queuing: Size/Length/Discards 0/100/0

Output queue - Protocol queuing: Size/Length/Discards 0/500/0

Output queue - FIFO queuing: Size/Length/Discards 0/75/0

Last clearing of counters: Never

Last 5 seconds input rate: 0.00 bytes/sec, 0 bits/sec, 0.00 packets/sec

Last 5 seconds output rate: 0.00 bytes/sec, 0 bits/sec, 0.00 packets/sec

Input:

0 packets, 0 bytes

0 errors, 0 runts, 0 giants,

0 crc, 0 align errors, 0 overruns,

0 aborts, 0 no buffers

0 frame errors

Output:

0 packets, 0 bytes

0 errors, 0 underruns, 0 collisions

# Display brief information about BRI 2/4/0.

<Sysname> display interface bri 2/4/0 brief

Brief information on interface(s) under route mode:

Link: ADM - administratively down; Stby - standby

Protocol: (s) - spoofing

Interface Link Protocol Main IP Description

Bri2/4/0 ADM UP(s) --

# Display brief information about all BRI interfaces in a down state and the causes.

<Sysname> display interface bri brief down

Brief information on interface(s) under route mode:

Link: ADM - administratively down; Stby - standby