R0106-HP MSR Router Series IP Multicast Command Reference(V7)

113
Usage guidelines
You must enable PIM-DM or PIM-SM on an interface before you execute this command.
Examples
# On the public network, enable IP multicast routing, enable PIM-DM on interface GigabitEthernet
2/1/1, and enable BFD for PIM on the interface.
<Sysname> system-view
[Sysname] multicast routing
[Sysname-mrib] quit
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim dm
[Sysname-GigabitEthernet2/1/1] pim bfd enable
Related commands
• pim dm
• pim sm
pim bsr-boundary
Use pim bsr-boundary to configure a PIM-SM domain border, namely, a bootstrap message boundary.
Use undo pim bsr-boundary to remove the configured PIM domain border.
Syntax
pim bsr-boundary
undo pim bsr-boundary
Default
No PIM domain border is configured.
Views
Interface view
Predefined user roles
network-admin
Examples
# Configure GigabitEthernet 2/1/1 as a PIM-SM domain border.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] pim bsr-boundary
Related commands
• c-bsr (PIM view)
• multicast boundary
pim dm
Use pim dm to enable PIM-DM.
Use undo pim dm to disable PIM-DM.