R0106-HP MSR Router Series IP Multicast Command Reference(V7)

146
Usage guidelines
You must execute this command before you use any other peer command. Otherwise, the system notifies
you that the MSDP peer does not exist.
Examples
# On the public network, configure the router with the IP address 125.10.7.6 as the MSDP peer of the
local router, and configure GigabitEthernet 2/1/1 as the local connection port.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 connect-interface gigabitethernet 2/1/1
peer description
Use peer description to configure the description for an MSDP peer.
Use undo peer description to delete the description for an MSDP peer.
Syntax
peer peer-address description text
undo peer peer-address description
Default
No description is configured for an MSDP peer.
Views
MSDP view
Predefined user roles
network-admin
Parameters
peer-address: Specifies an MSDP peer.
text: Specifies a description, a case-sensitive string of 1 to 80 characters, including spaces.
Examples
# On the public network, configure the description for the device at 125.10.7.6 as CustomerA.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 description CustomerA
peer mesh-group
Use peer mesh-group to configure an MSDP peer as a mesh group member.
Use undo peer mesh-group to remove an MSDP peer from the mesh group.
Syntax
peer peer-address mesh-group name
undo peer peer-address mesh-group
Default
An MSDP peer does not belong to any mesh group.