R0106-HP MSR Router Series IP Multicast Command Reference(V7)

177
Field Descri
p
tion
Querier
Status of MLD snooping querier:
• Enabled.
• Disabled.
Query-interval Interval for sending MLD general queries.
General-query source IP Source IP address of MLD general queries.
Special-query source IP Source IP address of MLD multicast-address-specific queries.
Report source IP Source IP address of MLD reports.
Done source IP Source IP address of MLD done messages.
display mld-snooping group
Use display mld-snooping group to display information about dynamic MLD snooping forwarding
entries.
Syntax
MSR2000/MSR3000:
display mld-snooping
group [ ipv6-group-address | ipv6-source-address ] * [ vlan vlan-id ] [ verbose ]
MSR4000:
display mld-snooping
group [ ipv6-group-address | ipv6-source-address ] * [ vlan vlan-id ] [ verbose ]
[ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. The value range for this
argument is FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y"
represent any hexadecimal numbers from 0 to F. If you do not specify any IPv6 multicast group, the
command displays information about the dynamic MLD snooping forwarding entries for all IPv6
multicast groups.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If you do not specify any IPv6
multicast source, the command displays information about the dynamic MLD snooping forwarding
entries for all IPv6 multicast sources.
vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify any VLAN,
the command displays information about the dynamic MLD snooping forwarding entries for all VLANs.
verbose: Displays detailed information.
slot slot-number: Specifies a card by the number of the slot where the card is inserted. If you do not
specify any card, the command displays information about the dynamic MLD snooping forwarding
entries on MPU. (MSR4000)