R0106-HP MSR Router Series IP Multicast Command Reference(V7)

178
Examples
# Display information about the dynamic MLD snooping forwarding entries for VLAN 2.
<Sysname> display mld-snooping group vlan 2 verbose
Total 1 entries.
VLAN 2: Total 1 entries.
(::,FF1E::101)
Attribute: local port
FSM information: normal
Host slots (0 in total):
Host ports (1 in total):
GE2/1/2 (00:03:23)
Table 51 Command output
Field Descri
p
tion
Total 1 entries Total number of dynamic MLD snooping forwarding entries.
VLAN 2: Total 1 entries Total number of dynamic MLD snooping forwarding entries in VLAN.
(::, FF1E::101)
(S, G) entry. If the IPv6 multicast source is not specified, the field in the S position
displays a double colon (::).
Attribute
Entry attribute:
• global port—The entry has a global port.
• local port—The entry has a port that resides on the specified card.
• slot—The entry has a port that resides on a card other than the specified card.
FSM information
Finite state machine information of the entry:
• delete—The entry attributes have been deleted.
• dummy—The entry is a new temporary entry.
• no info—No entry exists.
• normal—The entry is a normal entry.
Host slots (0 in total)
Slot IDs of the cards where the member ports reside and total number of the cards.
If member ports reside on the specified card, the slot ID of the card is not
displayed.
This field is displayed only on the MSR4000.
Host ports (1 in total) Member ports and total number of the member ports.
(00:03:23)
Remaining aging time for the dynamic member port. This field is always
displayed for a global port. For a non-global port:
• On the MSR2000 or MSR3000, this field is always displayed.
• On the MSR4000, this field is displayed if the port is on the MPU. Otherwise,
you must specify the slot slot-number option to display this field.
Related commands
reset mld-snooping group
display mld-snooping router-port
Use display mld-snooping router-port to display information about dynamic router ports.