R0106-HP MSR Router Series IP Multicast Command Reference(V7)

198
undo mld-snooping last-listener-query-interval
Default
The MLD last listener query interval in a VLAN is 1 second.
Views
VLAN view
Predefined user roles
network-admin
Parameters
interval: Sets the MLD last listener query interval in the range of 1 to 5 seconds.
Usage guidelines
The MLD last listener query interval determines the interval for sending MLD multicast-address-specific
queries and the maximum response time for MLD multicast-address-specific queries in a VLAN.
You must enable MLD snooping for a VLAN before you configure this command for the VLAN.
The configuration made in VLAN view is only effective on the current VLAN. It has higher priority than the
global configuration.
Examples
# Enable MLD snooping for VLAN 2 and set the MLD last listener query interval to 3 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping last-listener-query-interval 3
Related commands
• last-listener-query-interval (MLD-snooping view)
• mld-snooping enable
mld-snooping max-response-time
Use mld-snooping max-response-time to set the maximum response time for MLD general queries in the
VLAN.
Use undo mld-snooping max-response-time to restore the default.
Syntax
mld-snooping max-response-time interval
undo mld-snooping max-response-time
Default
The default setting is 10 seconds.
Views
VLAN view