R0106-HP MSR Router Series IP Multicast Command Reference(V7)

215
prefix-length: Specifies an address prefix length in the range of 8 to 128. The default is 128.
scope: Displays the IPv6 multicast group boundary information in the admin-scope zone.
scope-id: Specifies the ID of an admin-scoped zone, in the range of 3 to 15, which is identified by the
scope field in the IPv6 multicast group address. If you do not specify any admin-scoped zone, the
command displays the IPv6 multicast boundary information of all IPv6 admin-scope zones.
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify any interface, the command displays IPv6 multicast boundary information on all interfaces.
Examples
# Display the IPv6 multicast boundary information of all IPv6 multicast groups on all interfaces on the
public network.
<Sysname> display ipv6 multicast boundary group
Boundary Interface
FF1E::/64 GE2/1/1
# Display IPv6 multicast boundary information in all IPv6 admin-scope zones on all interfaces on the
public network.
<Sysname> display ipv6 multicast boundary scope
Boundary Interface
3 GigabitEthernet2/1/1
Table 57 Command output
Field Descri
p
tion
Boundary IPv6 multicast group or IPv6 admin-scope zone that corresponds to the IPv6 multicast boundary.
Interface Boundary interface that corresponds to the IPv6 multicast boundary.
Related commands
ipv6 multicast boundary
display ipv6 multicast forwarding df-info
Use display ipv6 multicast forwarding df-info to display information about the DF for IPv6 multicast
forwarding.
Syntax
MSR2000/MSR3000:
display ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding df-info [ ipv6-rp-address ]
[ verbose ]
MSR4000:
display ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding df-info [ ipv6-rp-address ]
[ verbose ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin