R0106-HP MSR Router Series IP Multicast Command Reference(V7)

261
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command displays the DF information
of IPv6 BIDIR-PIM on the public network.
ipv6-rp-address: Specifies the RP address of IPv6 BIDIR-PIM.
Examples
# Display the DF information of IPv6 BIDIR-PIM on the public network.
<Sysname> display ipv6 pim df-info
RP address: 1:1::1
Interface State DF-Pref DF-Metric DF-Uptime DF-Address
GE2/1/1 Lose 0 0 00:20:13 FE80:7:11::1
Vlan2 Win 10 1 00:20:12 FE80:10:1::2 (local)
Table 74 Command output
Field Descri
p
tion
State DF election state: Win or Lose.
DF-Pref Advertised route priority for DF election.
DF-Metric Advertised route metric for DF election.
DF-Uptime Length of time the DF has been up.
DF-Address
IP address of DF. If a local address is used, this field displays
(local) after the IPv6 address.
display ipv6 pim interface
Use display ipv6 pim interface to display IPv6 PIM information on an interface.
Syntax
display ipv6 pim [ vpn-instance vpn-instance-name ] interface [ interface-type interface-number ]
[ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, the command displays IPv6 PIM
information on an interface on the public network.