R0106-HP MSR Router Series IP Multicast Command Reference(V7)

276
Usage guidelines
You can set the joined/pruned state holdtime timer in IPv6 PIM view or interface view. The configurations
made in IPv6 PIM view are effective on all interfaces. The configurations made in interface view are
effective on only the current interface. If you set the joined/pruned state holdtime timer in both IPv6 PIM
view and interface view, the configuration in interface view always takes precedence.
To prevent the upstream neighbors from aging out, you must configure the interval for sending join/prune
messages to be less than the joined/pruned state holdtime timer.
Examples
# Set the global joined/pruned state holdtime timer to 280 seconds on the public network.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] holdtime join-prune 280
Related commands
• ipv6 pim holdtime join-prune
• timer join-prune (IPv6 PIM view)
ipv6 pim
Use ipv6 pim to enter IPv6 PIM view.
Use undo ipv6 pim to remove all configurations in IPv6 PIM view.
Syntax
ipv6 pim [ vpn-instance vpn-instance-name ]
undo ipv6 pim [ vpn-instance vpn-instance-name ]
Views
System view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If you do not specify any VPN instance, you enter public network IPv6 PIM view.
Examples
# Enable IPv6 multicast routing on the public network and enter public network IPv6 PIM view.
<Sysname> system-view
[Sysname] ipv6 multicast routing
[Sysname-mrib6] quit
[Sysname] ipv6 pim
[Sysname-pim6]
# Enable IPv6 multicast routing in VPN instance mvpn and enter IPv6 PIM view of VPN instance mvpn.
<Sysname> system-view
[Sysname] ipv6 multicast routing vpn-instance mvpn
[Sysname-mrib6-mvpn] quit
[Sysname] ipv6 pim vpn-instance mvpn